Except for a spray of Dullcote this is done and for 5 dollars' worth of ancient kit I'm pleased with the result. It won't make a foreground model but it ain't bad.
Saturday, 19 November 2016
Another silk purse from a sow's ear?
The 4 month summer modelling hiatus is at an end and in order to get my modelling mojo back I'm doing a small kit project.
A while ago I bought very cheaply an old (30 years?) Plasticville kit of a tiny barn and silo. The detailing is ok but crude and the old styrene is a bit brittle but I wanted to see if I could turn this ugly duckling into a little swan.
Both side walls were identical so that had to be changed. I chiselled of the raised details and opened up a hole and added studs.
A while ago I bought very cheaply an old (30 years?) Plasticville kit of a tiny barn and silo. The detailing is ok but crude and the old styrene is a bit brittle but I wanted to see if I could turn this ugly duckling into a little swan.
 |
| A similar but smaller Plasticville kit, the sides are smaller and different from mine. |
 |
| The walls distressed. |
 |
| Cracks and xacto grain. |
 |
| I undermined the back of the cracks with a milling bit in the Dremel |
Both side walls were identical so that had to be changed. I chiselled of the raised details and opened up a hole and added studs.
 |
| First breakthrough |
 |
| Break enlarged (oops!) and a board added back in the centre |
 |
| The exquisite workmanship behind the break. |
 |
| Seamed roofing on one side and Campbell's corrugated on the other |
 |
| A bit of rust. |
 |
| Roof pieces and silo primed |
 |
| Boards let into roof |
 |
| Roof patches missing shingles |
 |
| Silo top with seams carved in |
 |
| Silo |
Subscribe to:
Posts (Atom)